Question: The sheep pens on my farm in the Klein Karoo are built on a rock bank. I have piles of sheep pen manure that I want to use on my lucerne fields. Can I? Does it need to be mixed with water first? The manure is dry, almost like sand, and without lumps. What effect will it have on my soil? I use brackish water, and the fields are sandy/loamy.
Answer:
Are your sheep kept in pens and given feed, or do they graze in the veld and only sleep in the pen? What they eat largely determines the composition of the manure, which in turn can benefit or harm the chemical status of your soil, depending on the soil’s chemical analysis.
It is critical to compost the manure first to reduce the adverse effects of a wide carbon-to-nitrogen ratio (C:N ratio), and also to eliminate possible harmful bacteria and weed seeds.
In the case of incomplete composting, the C:N ratio should not be too wide, because this can increase the negative nitrogen period. An ideal C:N ratio is approximately 15:1. If the C:N ratio is not to your liking, you can add inorganic nitrogen to narrow the C:N ratio and eliminate the negative nitrogen period.
If the sheep graze in the veld or on old fields, they eat a lot of weeds. As a result, many weed seeds will appear in the manure and spread into your lucerne fields if you spread the manure there. If the sheep are permanently in a pen and fed, weed seeds will not appear in the manure.
Also read: Why nutrient efficiency, not input volume, determines profit on farm

Also read: Soil health: Key to unlocking greater yields for small-scale farmers
Analysis of sheep manure
If high levels of elements such as sodium and/or aluminium are present in the manure, this can have a detrimental effect on the soil and plants. Sheep manure usually contains much less sodium and aluminium than cattle manure.
The farm’s brackish water already contains a lot of salts (sodium). The soil sodium levels need to be managed because sodium from the irrigation water builds up in the soil. Sodium levels should preferably be below 2% in terms of base cation ratios. If the sodium ratio to the other base cations in the soil is above 2%, it suppresses other elements in the soil, especially potassium.
In the case of a crop such as lucerne, which is a heavy potassium feeder, potassium should not be suppressed by other detrimental elements.
Sodium and potassium
A plant root cannot distinguish between a sodium and potassium molecule because both have one positive charge. The plant then takes up sodium (which is detrimental to the plant) instead of potassium, which has a major impact on the plant’s moisture regulation. So, get rid of the sodium (salt) in the soil so that the plant can take up potassium effectively. Products are available that can help leach sodium from the soil.
If the sodium levels in the soil are high, the right fertiliser source must be used to meet the potassium requirements of the crop.
Potassium chloride is the most common and cheapest source of potassium, but it is not always the most suitable if the sodium levels in the soil are not as desired. In such a case, potassium sulphate is more appropriate.
Also read: The critical role of time in manure composting

Also read: Irrigating with animal manure water
Potassium chloride
When potassium chloride is used as a fertiliser source, sodium should not be present in excess in the soil. If it is, the sodium binds with the chlorine, which then forms sodium chloride (common table salt). This salt is very detrimental to soil structure and plant nutrition. Soils will then typically settle, weakening water infiltration and reducing gas exchange between the soil and the atmosphere. The plant’s moisture regulation will weaken, and the salt will adversely affect the moisture in the plant cells.
Manure sometimes contains heavy metals, such as aluminium. Aluminium is very detrimental to plants and damages plant roots because it is toxic.
If the plant roots are damaged and there is no desired absorption of nutrients, nutrient deficiencies occur in the plant. However, this is not a deficiency of nutrients in the soil, but rather a case of the plant not being able to absorb enough nutrients due to a damaged root system.
Most farmers spread manure to benefit from its phosphate and potassium content. The amount of phosphate and potassium in organic fertilisers is usually low and can vary from 0.5% to 4%, depending on the type of manure.
Also read: Lucerne is a promising supplementary crop for Zululand’s struggling sugarcane growers
Conclusion
To determine the right amount of phosphate and potassium, as well as the presence of other elements in the manure, the manure must be analysed to determine exactly how much of each element is present. A correct recommendation can then be made according to the soil and plant requirements.
The quality of the irrigation water should also be analysed to ensure the right fertiliser sources are used on the fields.
Written by agriculturalist Rupert Vermaas.
Disclaimer: AfricanFarming.com and the expert accept no responsibility or liability for any damage, loss or personal injury that may result from the use of this content.
















































